Free Crochet Hat Pattern Round Up

This Is A Free Pattern Round Up

All Of My Very Own

Each Free Hat Pattern 

Was Written By Me

And Is Available 

Right Here On My Blog

Free For You To Use

Which One Would You Make And Wear?

Free Pattern Links Provided Below

In no particular order, here are the links

Beret with a simple cable stitch. Free Crochet Pattern here.

Ripple Stitch Hat. Free Crochet Pattern Here

Beret with a simple cross stitch. Free Crochet Pattern Here

(2 Free Patterns) Chunky Beret and 

Three Season's Beret. Free Crochet Pattern Here

Crochet Tezzie Hat. Free Crochet Pattern Here

 

  

Crochet Crocodile Stitch Hat. Free Crochet Pattern Here

Crochet Catherine Wheel Hat. Free Crochet Pattern Here

Which Stitch Hat. Free Crochet Pattern Here.

If I was to pick a hat that I am most proud of, I would say it is the Catherine Wheel Stitch, hat pattern. It not only has my name, but it was a challenge and a pleasure to make it work.

Hope you like my little round up here and thank you to my readers for all of your positive and generous feed back!

 

Ripple Stitch Hat. Free Crochet Pattern

Adult Size Crochet Ripple Stitch/Chevron Stitch Hat

  My inspiration for this pattern was Joel Maddens hair color, he changes it every week or maybe every day. 

He is a coach on The Voice.

I usually make my medium hats with a beginning crown of 72 st's, but the pattern used for the hat, made it shrink, so I had to start over with a crown count of 84 st's, it was a perfect count as the stitch pattern is dividable by 14 st's.

Below is the 70 st count for the crown, it was too small for a medium adult

 Below is the 84 st count, big difference!

Hook size: AU 4.00mm. US G/6

Yarn ply: AU 8 ply. US 4 ply medium approx 120 gm’s

Tension: 9 dc’s, 2 inches wide. 1 dc, half inch high

US terms used
Beginner +

Time approx 3 hours: Size medium adult

Stitches used:

Ch = chain

Sl st = slip st

Sc = single crochet

Hdc = half double crochet

Dc = double crochet

Fphdc = front post half double crochet

Bphdc = back post half double crochet

Dec = decrease

Inc = Increase = more than 1 stitch in the same stitch

Yo = yarn over hook

Special Instructions:

Pattern is a 14 stitch repeat. Make your crown (end count) in multiples of 14. Example, I am using 84 dc which was an easy target to get to using the basic dc crown; I increased in 1 more row.

 I am using this size as the pattern tends to shrink down one size, so I am calling this size a medium.

Very small adult size you will need 70 dc st’s in the crown. You can manipulate the stitch count by adding or subtracting a stitch anywhere in the last row of making your crown, you may need to add or subtract 2 or 4 st’s, but that’s okay.

dc dec, next 3 st’s = yo hook, insert hook into next st, pull up a loop (3 loops on hook), yo pull through 2 loops only, yo hook, , insert hook into next st, pull up a loop (4 loops on hook), ), yo pull through 2 loops only,  yo hook, insert hook into next st, pull up a loop (5 loops on hook), yo pull through 2 loops, yo pull through remaining 4 loops on hook

To begin make the basic dc crown found here.

To get 84 st’s complete row 7 below.

Row 7, Ch 3, work 1 dc in next 4 dc, work 2 dc in next dc, *work 1 dc in each of next 5 dc, work 2 dc in next dc,* repeat from *to* to end, sl st to join in top of ch 3 (84 dc)

Set Up Row for Pattern, (color changes will not be mentioned)

Row 1, Ch 3, work 1 dc in the next 3 st’s, work 1 sc in the next 6 st’s, *work 1 dc in the next 8 st’s, , work 1 sc in the next 6 st’s,* repeat from*to* to the last 4 st’s, work 1 dc in the next 4 st’s, , sl st to join in top of ch 3

Pattern:

Row 2, Ch 3, work 2 dc’s in same space as sl st (inc made), work 1 dc in next 3 st’s, dc dec, next 3 st’s (dec made), dc dec, next 3 st’s (dec made),  work 1 dc in next 3 st’s, work 3 dc’s in the next st (inc made),

(14 st, pattern just made)

*work 3 dc’s  in the next st (inc made), work 1 dc in next 3 st’s, dc dec, next 3 st’s (dec made), dc dec, next 3 st’s (dec made),  work 1 dc in next 3 st’s, work 3 dc’s  in the next st (inc made),* repeat from *to* to end of the round, sl st to join in top of ch 3

Row 3 and remaining rows of pattern, repeat pattern row 2 approx 6 or 7 times in total (or length desired i.e: slouch look)

It’s up to you if you want a straight hat edge or the wave hat edge. If you want the wave hat edge add more rows of the pattern for length desired

Straight Hat Edge

Row 1, work 1 sc in the next 4 st’s, work 1 dc in the next 7 st’s, work 1 sc in the next 3 st’s. *work 1 sc in the next 3 st’s, work 1 dc in the next 8 st’s, work 1 sc in the next 3 st’s* repeat from *to* to end, sl st into the first st of the round

Special size instructions:

For a tighter hat edge replace the hdc with sc’s.

For a looser hat edge replace the hdc with dc’s.

Row 2, ch 2 (first hdc), work 1 hdc in each st to end of the round, sl st into ch 2 space to join

Row 3, ch 2,* work 1 bphdc in next st, work 1 fphdc in next st,* repeat from *to* to end, sl st into ch 2 space to join

Row 4, repeat row 3 for length desired.

Finish off and tie in ends.

 You may find this amusing, this is how I jotted down the pattern as I made the hat and pattern.

  

Chickie Magoo helped test this pattern and she did find a mistake, lucky for me she did!
This is her hat made from the pattern
Chickie chose a slouch look.
This is Chickie's feed back.

I opted to add a few rows of FPHDC/BPHDC to enhance the slouch look. Just a note, the depth from crown to edge is a tad long for a non-slouch @ 84 sts ... at least it is for me. My head circ is 22". This hat measures 8" from top of crown to the beginning of the post stitch edge, then another inch for the post stitch edging.... that's why it's slightly slouchy. I don't mind that look so it's all good but just so you know. As for speed, once I figured out the pattern, it was a breeze and didn't take long at all, no more than just a plain hat really and the repeats are very easy to remember. After the first coloured stripe (once I figured it out lol) I didn't need to refer back to the pattern till I got to the straight edge... I would say it's quicker than it looks! Thank YOU x

 Good luck with your project, I’d love to hear your feed back. Please do not sell this pattern, please link back to me if you use this pattern, I’d love to see this used for charity, and you can make and sell items from this pattern too.

 TO PRINT OUT THE PATTERN, COPY AND PASTE TO A WORD DOCUMENT ON YOUR COMPUTER.

Crochet Continuous Granny Daughters

 technique could be used in the granny edge slouch hat

Not sure about a color change using this technique, but it could be possible.

Crochet Pattern Bonanza

Crochet Pattern Bonanza

 This is a free pattern site you may want to have a look at.

They are currently getting around 16,000 visitors per week.

What are the highlights of this new site?

Pictured icons lead you to the free pattern.

I love this idea.

You can also link to this site which in return will link back to you.

I have submitted my Tezzie hat pattern.

 This was also a talking point at Craft Gossip it's nice to hear positive things regarding you work.

Free Crafts Newsletter

Free Crafts Newsletter
Get free craft projects, ideas & special offers + a FREE ebook, “ St. Patrick’s Day Crafts & Recipes.”

Click on Picture Below to get to the free Link!

Quick Crochet 3 to 6 month old Baby Beanie

Cat's Beanie-Babe #2

The above beanie-babe is a size new born to 3 months, pattern here.

Below is the beanie-babe size 3 to 6 months, displayed on the same doll, so you can compare the size difference.

Below is an absolutely gorgeous 13 week old baby wearing this hat design for 3 to 6 months, her Grand Mother made it for her and gave me permission to use the photo, thank you Chickie.

To fit: 3 to 6 month old

Hook size: 4.00mm US G/6

Yarn: 8 ply approx 50 gm’s US DK/Medium

US crochet terms used

Skill level: beginner +

Tension: medium

Time: approx 2 hours

Stitches used:

Sl st= slip stitch

Ch= chain

Hdc= half double crochet  

yo, insert hook into top two loops of stitch,
yo, pull through stitch (3 lps on hook),
yo,  pull through all 3 loops on hook.

Bl= back loop

Fphdc= front post half double crochet

Bphdc= back post half double crochet

Front and back post video tutorial

Measurements:  
Head Circumference 15 inches, hat height 6 to 7 inches

 The beanie-babe is designed as a smart grow. 
It will grow with your baby by adjusting the ribbed edge.

The beanie begins at the top of the head and worked down to the ribbed edging, the beanie is worked in one piece using the hdc st, which makes a nice closed stitch.

Begin.

Beginning ch 1 of every rnd is not counted as a st.

Chain 4, sl st to first ch to form a ring.

Row 1 ch 1, work 12 hdc into ring, sl st to join in the 1st hdc (you will do this on every round until a ch 2 begins)

Row 2 ch 1, work 2 hdc into each hdc around to end, sl st to join (24 hdc)

Row 3 ch 1, *work 1 hdc into the next 2 hdc, work 2 hdc into the next hdc* repeat from *to* to end, sl st to join (32 hdc)

Row 4 ch 1, *work 1 hdc into the next 3 hdc, work 2 hdc into the next hdc* repeat from *to* to end, sl st to join (40 hdc)

Row 5 ch 1, *work 1 hdc into the next 4 hdc, work 2 hdc into the next hdc* repeat from *to* to end, sl st to join (48 hdc)

Row 6 ch 1, *work 1 hdc into the next 11 hdc, work 2 hdc into the next hdc*
repeat from *to* to end, sl st to join (52 hdc)

Stop increasing 

Row 7 ch 1, work 1 hdc in each hdc to end, sl st to join (52 hdc)

Rows 8 to 19, repeat row 7, or repeat row 7, until hat measure's 6 inches long

Row 20 ch 1, work 1 hdc in the front loop of each hdc around (52 hdc),sl st to join by going around the back of the sc (see image)

Making the ribbed edge:

Row 21 ch 2 (the ch 2 is now a new st),* work 1 fphdc around the post of the next hdc, work 1 bphdc around the post of the next hdc,* repeat from *to* to end of the round,  sl st into top of ch 2 to join

Row 22 , 23 and 24, ch 2, *work 1 fphdc around the post of the next fphdc, work 1 bphdc around the post of the next bphdc,* repeat from *to* to end of round, sl st to join, at the end of row 20, finish off yarn leaving a small tail to weave in 

Hide loose ends, fold up ribbed edge, add pompom if you choose, or my new beary easy bear applique, link here.

Good luck with your baby beanie, I’d love to hear your feed back.

Please do not sell this pattern, please link back to me if you use this pattern, I’d love to see this used for charity, and you can make and sell items from this pattern too.

Ribbed Look Bay Beanie

 

Quick Crochet Newborn Baby Beanie

Cat's Beanie-Babe #1

To fit: newborn

Hook size: 4.00mm US G/6

Yarn: 8 ply approx 50 gm’s US DK/Medium

US crochet terms used

Skill level: beginner +

Tension: medium

Time: approx 2 hours

Stitches used:

Sl st= slip stitch

Ch= chain

Hdc= half double crochet  

yo, insert hook into top two loops of stitch,
yo, pull through stitch (3 lps on hook),
yo,  pull through all 3 loops on hook.

Bl= back loop

Fphdc= front post half double crochet

Bphdc= back post half double crochet

Front and back post video tutorials

Measurements: Head Circumference 13 inches, hat height 5 inches

Row 5 end increases

Row 5 end increases

Length of hat with out ribbed edge

Length of hat with ribbed edge

Special Notes: I like the wrong side of the hdc to show on the out side, but if you prefer to show the right side on the out side, on row 16, work that row into the front loop of the st, this helps for better folding of the ribbed edge

 Wrong side out

Right side out

The beanie begins at the top of the head and worked down to the ribbed edging, the beanie is worked in one piece using the hdc st, which makes a nice closed stitch.

Begin.

Beginning ch 1 of every rnd is not counted as a st.

Chain 4, sl st to first ch to form a ring.

Row 1 ch 1, work 12 hdc into ring, sl st to join in the 1st hdc (you will do this on every round until a ch 2 begins)

Row 2 ch 1, work 2 hdc into each hdc around to end, sl st to join (24 hdc)

Row 3 ch 1, *work 1 hdc into the next 2 hdc, work 2 hdc into the next* repeat from *to* to end, sl st to join (32 hdc)

Row 4 ch 1, *work 1 hdc into the next 3 hdc, work 2 hdc into the next* repeat from *to* to end, sl st to join (40 hdc)

Row 5 ch 1, *work 1 hdc into the next 4 hdc, work 2 hdc into the next* repeat from *to* to end, sl st to join (48 hdc)

Stop increasing

Row 6 to 15 ch 1, work 1 hdc into each hdc around to end, sl st to join

IF YOU WANT YOUR BEANIE LONGER DO MORE ROWS HERE, WORK TO 5.5 INCHES FOR A NEW BORN, THEN FOLLOW THE REST OF THE PATTERN

Row 16 ch 1, work 1 hdc in the back loop of each hdc around to end, (48 hdc),sl st to join by going around the back of the sc (see image)

Making the ribbed edge:

Row 17 ch 2 (the ch 2 is now a new st),* work 1 fphdc around the post of the next hdc, work 1 bphdc around the post of the next hdc,* repeat from *to* to end of the round,  sl st into top of ch 2 to join

Row 18 , 19 and 20, ch 2, *work 1 fphdc around the post of the next fphdc, work 1 bphdc around the post of the next bphdc,* repeat from *to* to end of round, sl st to join, at the end of row 20, finish off yarn leaving a small tail to weave in 

The beanie-babe is designed as a smart grow. 

It will grow with your baby by adjusting the ribbed edge.

Hide loose ends, fold up ribbed edge, add pompom if you choose,or my new beary easy bear applique, link here

Good luck with your baby beanie, I’d love to hear your feed back.

Please do not sell this pattern, please link back to me if you use this pattern, I’d love to see this used for charity, and you can make and sell items from this pattern too.

Ribbed Look Bay Beanie

Not Sponge Bob Square Pants Crochet Hat

It was a bit like trying to fit a square peg into a round hole, but I tried.

Sponge Bob round pants hat.

Not Sponge Bob Square Pants Hat



To fit 2 to 4 yr old approx


AU 8 ply yarn (US Light worsted/DK) Less than 50 gm of main color (yellow)


Small amounts of contrasting colours


White, brown, blue, black and red


4.00 mm hook (US G)


US st abbreviation used


Stitches used hdc = yarn over hook, insert hook into st, pull yarn through st, (3 loops on hook) pull yarn through all 3 loops on hook. (htrb AU, UK)


Sc


Hdc foundation row , see video tutorial


Color changing , see video tutorial

Magic circle, see video tutorial

Medium tension used, I am neither a loose or tight crocheter.


Hat begins at crown


Begin.


Beginning ch 1 of every rnd is not counted as a st.


Working with yellow yarn:


Chain up 4, sl st to first ch to form a circle.


Row 1: ch 1, work 12 hdc into ring, sl st to join in the 1st hdc (you will do this on every round)


Row 2: ch 1, work 2 hdc into each hdc around sl st to join (24 hdc)


Row 3: ch 1, *work 1 hdc into the next 2 hdc, work 2 hdc into the next* repeat from *to* sl st to join (32 hdc)


Row 4: ch 1, *work 1 hdc into the next 3 hdc, work 2 hdc into the next* repeat from *to* sl st to join (40 hdc)


Row 5: ch 1, *work 1 hdc into the next 4 hdc, work 2 hdc into the next* repeat from *to* sl st to join (48 hdc)


Row 6: ch 1, *work 1 hdc into the next 5 hdc, work 2 hdc into the next* repeat from *to* sl st to join (56 hdc)


End Increases


Row 7: ch 1, work 1 hdc in each st around sl st to join (56 hdc)


Rows: 8 to 16: repeat row 7, in yellow


Rows: 17 and 18, repeat row 7 in white


Rows: 19 and 20 repeat row 7 in brown


Belt row (can be worked in brown and belt affect can be sewn on later)


Row: 21 *work 4 st’s in brown then 4 st’s in black* repeat from *to* to end


Row: 22 and 23 repeat row 7 in brown, finish off and sew in all ends

Making the features:


Eye’s made with 3 different sized circles: 
Using white: make 2


Make a magic circle and chain 1 (see tutorial for magic circle)


Row 1: work 6 sc into ring, sl st to first sc to join, ch 1 and tighten up magic circle (but not too tight do that when you have finished the circle)


Row 2: work 2 sc in each sc around, sl st to first sc to join, ch 1 (12 sc)


Row 3: *work 1 sc in next sc, work 2 sc in next sc* repeat from *to* to end, sl st to first sc to join, ch 1 (18 sc)


Row 4: *work 1 sc in next 2 sc, work 2 sc in next sc* repeat from *to* to end, sl st to first sc to join, do not ch 1 (24 sc), fin off leaving a long tail for sewing eye’s onto hat


Using blue: make 2


Make a magic circle and chain 1 (see tutorial for magic circle)


Row 1: work 6 sc into ring, sl st to first sc to join, ch 1 and tighten up magic circle (but not too tight do that when you have finished the eye)


Row 2: work 2 sc in each sc around, sl st to first sc to join, do not ch 1 (12 sc) fin off leaving a long tail for sewing eye’s onto hat


Using black: make 2


Make a magic circle and chain 1 (see tutorial for magic circle)


Row 1: work 6 sc into ring, sl st to first sc to join, fin off leaving a long tail for sewing eye’s onto hat and tighten up magic circle


Making teeth use white: make 2


Work a 2 hdc foundation row, finish off leaving long tail for sewing


Making tie using red: make 1


Work a 3 hdc foundaton row, ch 3 work 3 sc in 2nd ch from hook, finish off leaving long tail for sewing


Making nose using yellow: make 1


Start and end with a long tail, work an 8 hdc foundation row fin off, fold nose in half sew one side up finish off, then sew the other side leaving a small opening that will lay flat when sewing onto hat (this will make the nose stand out ward instead of flat)


Putting the eyes together:

Firstly sew in loose ends of all pieces except for the long tail for sewing together and onto hat


Sew blue circle onto white circle in a central position

Sew black circle onto the blue circle in a central position

Sew eyes onto hat making sure they touch one another


Sew nose into the space between the eyes

Hand stitch mouth onto hat coming down from an eye and straight across to the same position on the other eye and go upward to the opposite position you began with (see pictures)

Attach teeth to under mouth, using the nose for a guide, place teeth either side of the nose, so that the nose is centred to the teeth


Place tie below and in between teeth (if you need to sew on belt, do the belt before the tie)

Sew 3 eye lashes above each eye

Sit back and admire your handy work.

You can use this pattern for all purposes, but please do not sell this pattern.

Below are the video tutorials you may need.

This video shows the hdc foundation row.


This video shows how to change colors on the same row (for the belt)


This video shows you how to do the hdc st


This video shows you how to do a magic circle


A big thank you to all of the video tutorial makers.