Baby Bonnet, Booties and Mittens.

Please note, conversions may be needed for countries other than Australia.

Get them .here

abbreviations = http://www.bellaonline.com/articles/art347.asp

yarn thickness = http://aussieknitters.com.au/Yarn.316.0.html

Cathy’s Crocheted, Baby Shell Bonnet
© Cathy Wood. 2007
Fund Raiser Pattern For

The Salvatiom Army

Materials
Size 3.50 mm hook.
8 ply yarn.
Difficulty: Easy. Size: New Born
Abbreviations:

TRBL= yarn over hook, insert hook into stitch, pull yarn through stitch, (3 loops on hook) yarn over hook, pull through 2 loops, yarn over hook, pull through 2 loops again.

HTRBL= yarn over hook, insert hook into stitch, pull yarn through stitch, (3 loops on hook) yarn over hook, pull through all 3 loops.

DC= insert hook into stitch, pull yarn through stitch, (2 loops on hook) pull yarn through 2 loops.

Beginning at crown

1st Row Ch 4, work 15 TRBL in first Ch, join to Ch 3. (16 TRBL)

2nd Row Ch 3, TRBL in same space as joining Ch, 2 TRBL in each TRBL Stitch around, join to Ch 3. (32 TRBL)

3rd Row Ch 3, TRBL in next Stitch, *2 TRBL in next Stitch, TRBL in next 2 Stitches* repeat from *to* around, join to Ch 3.
4th Row Ch 3, TRBL in next 36 St’s Ch 3 turn (37 St’s)

Shell Pattern

5th Row 1 TRBL in 2nd TRBL from hook, miss 2
TRBL, 5 TRBL in next TRBL, miss 2 TRBL, *1 TRBL in next 2 TRBL, miss 2 TRBL, 5 TRBL in next TRBL miss 2 TRBL* repeat from *to* 4 times, 1 TRBL in TRBL, 1 TRBL in turning Ch, Ch 3 turn.

6th Row to 9th Row repeat row 5, ending with Ch 1 and working around the neck line

Neck Line
10th Row HTRBL about 23 HTRBL evenly across neck line, Ch 2 turn

Eyelet Row

11th Row HTRBL in 2nd HTRBL from hook, Ch 1, miss 1 HTRBL, HTRBL in next HTRBL, *Ch 1, miss 1 HTRBL, HTRBL in next HTRBL,* repeat from *to* to end turning Ch, HTRBL in turning Ch, Ch 2 turn

12th Row Work 1 HTRBL in each Ch 1 space and 1 HTRBL in each HTRBL to end, Ch 2 turn

13th Row Work HTRBL in 2nd HTRBL from hook, work 1 HTRBL in each HTRBL to end. Fasten off

Sew in loose ends
Make 80 Ch for Bonnet tie, or thread a ribbon through eyelets.

For smaller or larger sizes, use a smaller or larger hook.

Cathy’s Crocheted, Baby Shell Bootie
© Cathy Wood. 2007
Fund Raiser Pattern For

The Salvation Army

Materials.
Size 3.50 mm hook.
8 ply yarn.
Difficulty: Easy. Size: New Born
Abbreviations:

TRBL= yarn over hook, insert hook into stitch, pull yarn through stitch, (3 loops on hook) yarn over hook, pull through 2 loops, yarn over hook, pull through 2 loops again.

DC= insert hook into stitch, pull yarn through stitch, (2 loops on hook) pull yarn through 2 loops.

Beginning at ankle and working upwards Ch 24
1st Row TRBL in 3rd Ch from hook, miss 2 Ch, 5 TRBL in next Ch, miss 2 Ch, 1 TRBL next 2 Ch,*miss 2 Ch, 5 TRBL in next Ch, miss 2 Ch, 1 TRBL in next 2 Ch* repeat from *to* to end, Ch 3 turn.

2nd Row 1 TRBL in 2nd TRBL from hook, miss 2 TRBL, 5 TRBL in next TRBL, *miss 2 TRBL, 1 TRBL in next 2 TRBL, miss 2 TRBL, 5 TRBL in next TRBL,* repeat from *to* once, miss 2 TRBL, 1 TRBL in next TRBL, 1 TRBL in turning CH, Ch 3 turn.

3rd Row As 2nd row, but do not Ch 3 at end of row, break off yarn.


FOOT

4th Row Rejoin yarn to other side of beginning 24 Ch, Ch 2, work 1 DC in next 13 Ch, Ch 1 turn.

5th Row (Ch 1 is not counted as a DC) 1 DC in next 5 DC, Ch 1 turn.

6th Row to 10th Row repeat row 5, but do not turn at the end of row 10.

11th Row Slip Stitch loosely down the side of the flap you just made, work 1 DC in next 8 Ch, Ch 2 turn.

12th Row 1 DC in 2nd DC from hook, 1 DC in next 6 DC, work 6 DC up along side of flap, work 1 DC in next 5 DC, work 6 DC down side of flap, work 1 DC in next 8 DC, Ch 2 turn.

13th Row 1 DC in 2nd DC from hook, 1 DC in each DC to end, Ch 2 turn.
(33 DC)
14th Row Repeat row 13.

DECREASE ROWS

15th Row 1 DC in 2nd DC from hook, miss 1DC, 1 DC in next 11 DC, (miss 1 DC, 1 DC in next DC) 3 times, 1 DC in next 10 DC, miss 1 DC, 1 DC in next DC, 1 DC in turning Ch, Ch 2 turn.

16th Row 1 DC in 2nd DC from hook, miss 1 DC, 1 DC in next 8 DC, (miss 1 DC, 1 DC in next DC) 3 times, 1 DC in next 8 DC, miss 1 DC, 1 DC in next DC, 1 DC in turning Ch, Ch 2 turn.

17th Row 1 DC in 2nd DC from hook, miss 1 DC, 1 DC in next 17 DC, miss 1 DC, 1 DC in next DC, 1 DC in turning Ch. Finish off.

Sew seams together, Ch 65, for ties.


For smaller or larger sizes, use a smaller or larger hook.

Cathy’s Crocheted, Baby Shell Mitten
© Cathy Wood. 2007
Fund Raiser Pattern For

The Salvation Army

Materials.
Size 3.50 mm hook.
8 ply yarn.
Difficulty: Easy. Size: New Born
Abbreviations:
HTRBL= yarn over hook, insert hook into stitch, pull yarn through stitch, (3 loops on hook) yarn over hook, pull through all 3 loops.

TRBL= yarn over hook, insert hook into stitch, pull yarn through stitch, (3 loops on hook) yarn over hook, pull through 2 loops, yarn over hook, pull through 2 loops again.

Beginning at wrist CH, 17

1st Row HTRBL in 3rd chain from hook, HTRBL in each chain to end. (15 HTRBL) SL, ST in beginning chain to form a ring.

Eyelet Row

2nd Row CH 2, HTRBL in 2nd HTRBL from hook, *CH 1, miss 1 HTRBL, HTRBL in next HTRBL* repeat from *to* to end.
SL, ST in Ch 2 to join.

3rd Row CH 2, * HTRBL in chain 1 space, HTRBL in HTRBL,*
Repeat from * to * to the end. SL, ST in CH 2 to join.

Increase Row

4th Row CH 2, (CH 2 is counted as 1st HTRBL). 1 HTRBL in next HTRBL,
*2 HTRBL in next HTRBL, 1 HTRBL in next HTRBL * repeat from *to* to end (About 22 HTRBL). SL, ST in CH 2 to join.

5th Row CH 2, (CH 2 is counted as 1st HTRBL). 1 HTRBL in 1 HTRBL to end. SL, ST in CH 2 to join.

6th Row as 5th Row
Decrease Row

7th Row CH 2, (CH 2 is counted as 1st HTRBL). HTRBL in 2nd HTRBL from hook, HTRBL 2 HTRBL together, *1 HTRBL in next 2 HTRBL, HTRBL 2 HTRBL together,* repeat from *to* to final HTRBL, HTRBL in HTRBL (About 16 HTRBL). SL, ST in CH 2 to join.

8th Row as 5th Row
Decrease Row

9th Row CH 2, (CH 2 is counted as 1st HTRBL). HTRBL 2nd and 3rd HTRBL from hook together, * HTRBL next 2 HTRBL together*, continue from *to * to end, SL, ST in CH 2 to join.

Decrease Row

10th Row CH 2, (CH 2 is counted as 1st HTRBL). HTRBL 2nd and 3rd HTRBL from hook together, * HTRBL next 2 HTRBL together*, continue from *to * to end. Finish off leaving a long enough piece of yarn attached, to sew top of mitt together.

Shell Border

Rejoin yarn to other side of beginning 17 chain.

1st Row CH 3, 1 TRBL in next CH, *miss next 2 chain, 5 TRBL in next CH, miss next 2 chain, 1 TRBL in next 2 chain,* repeat from *to* to end. SL, ST in CH 3 to join. Finish off.

CH 50, to make ties for mitt and weave through the eyelets.
Or weave through ribbon.
For smaller or larger sizes, use a smaller or larger hook.

The "Slip n Slide" Crochet Hat Pattern

The "Slip n Slide" hat pattern is very decorative and repetitive to make. It has a pattern stitch count of 6 and can be made in many sizes. I would also class this hat as a unisex design, the yarn color that you use will determine your choice for a male or females hat. The construction of the pattern is made up of a shell which is 3 dc, ch 3, 3 dc. After the set up round, you will continue with the shells that have a cluster in between each shell, that cluster is made with the 3 dc's of one half of the shell and 3 dc's of the other half of the next set of shells. This stitch pattern is easily compared to the chevron/zigzag crochet patterns.
If you would like to print this pattern, scroll down to the bottom of the page then copy the pattern and paste to a word document.

The hat begins at the bottom, which is made in a strip, then joined to form a circle.

This hat can be made in many sizes, from new born to large adult using a stitch count in multiples of 6.
You can also use a thicker yarn and larger hook.
Once the band has been made and joined for the size of your hat, the 1st and 2nd rows of the body of your hat will be adjusted for the pattern stitch count.

Written in US terms.  
Suggested Materials needed:
8 ply/DK Light Worsted
4mm/G-6
Stitches used:

ch = chain
sc = single crochet
back loop
hdc = half double crochet
dc = double crochet
dec = decrease
inc = increase
yo = yarn over
bpdc = back post double crochet
Special Stitches:
Shell st = 3 dc, ch 3, 3 dc all in the same space

Cluster = make a bpdc cluster with the next 6 dc of the row below.
All the cluster stitches are made by going into the st from the back to the front (back post dc).
You will, yo hook insert hook from the back to the front and draw up a loop, yo and draw through 2 loops (2 loops on hook), repeat for the next 5 dc's, you will have 7 loops on your hook, yo and pull through all loops, cluster made.

Please Use The Guide Below

To Make The Pattern For Your 

Selected Size.

The band will need to be a Few rows shorter than the pattern stitch count as the band will need to stretch.

The written pattern directions are for a new born using 8 ply and a 4mm hook, but if you are using 10 ply yarn and a 5mm hook this will fit a small to medium adult.

To Begin:
Make the band/brim
Ch 9
Row 1. work 1 sc in 2nd ch from hook and in each ch across, ch 1 and turn (8sc)
Row 2. work 1 sc into the back loop of each sc, ch 1 and turn (8sc)
continue working row 2 until you have approx 46 rows.

Last row of the band and joining the band video. 

Join band into a circle.

Leave yarn attached, ch 1 and sl st to join using the back loops of the last row made and the unworked loops of the beginning chain row.

TIP: Do not join too tight as it may pucker.

The first row around the hat edge and where to place your stitches

Once your band is joined continue with the first round of st's, the above video will assist you in st placement.

Round 1: Ch 1, work 1 hdc in each row end to end, sl st to join round.

Make your increases or decreases evenly in round 2

Round 2: Ch 1, work 1 hdc in the back loop of each hdc or the round, sl st to join round. (your count should be in multiples of 6)

Pattern Set Up Round 3

Pattern Set Up Round:

Round 3: Ch 3, work 2 dc, ch 3 and 3 dc in same st of the ch 3, skip 2 st's, work 1 sc in next st, *skip 2 st's, work the shell st in next st, skip 2 st's, work 1 sc in next st, skip 2 st's* repeat from *to* to end of round. Join all pattern rows like this, loosely sl st into the next 3 st's and into the ch 3 space.

Pattern Round 4. Part 1  Cluster st Explained

Pattern Round:

Round 4: Ch 3, work 2 dc, ch 3 and 3 dc in same st of the ch 3, *work (Special Stitch, Cluster) the bpdc cluster with the next 6 dc's, work the shell st in the ch 3 space* repeat from *to* to end of round, join round.

Pattern Round 4. Part 2

Rounds 5 and on, repeat Round 4 until the height of your hat almost reaches your crown. Do not sl st to the ch 3 space, make the sl st into the top of the ch 3.

The next rounds made, will give the hat a straight edge again.

Making the crown:

Round 1:

 

 Round 1: ch 1, work a hdc in the top of the ch 3, work 1 hdc in the next dc, hdc the next dc and the ch 3 space of the shell together, work 1 hdc in each of the next 2 dc, hdc the next dc and the top of the cluster together, (you will have made 6 hdc's) *work 1 hdc into each of the next 2 dc, hdc the next dc and the ch 3 space of the shell together, work 1 hdc in each of the next 2 dc, hdc the next dc and the top of the cluster together* repeat from *to* to join, sl st into the top of the beginning hdc st. (your stitch count will be in multiples of 6)

Round 2: 

Round 2: ch 1, (work all st's in to the back loop of the hdc's) work 1 hdc in the back loop of each hdc of the round, to join, sl st into the top of the beginning hdc st.

Begin decreases: For a baby, toddler hat complete the crown with the hdc st, for adult sizes complete the crown with the dc st.
For the purpose of this pattern, I will write the hdc st, please adjust this to a dc for the adult size hats and work a ch 2 at the beginning of the round, but do not count that ch 2 as a stitch.

Round 3: ch 1, *work 1 hdc in the next 4 st's, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,

to join, sl st into the top of the beginning hdc st.

Round 4: ch 1, *work 1 hdc in the next 3 st's, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,
to join, sl st into the top of the beginning hdc st.

Round 5: ch 1, *work 1 hdc in the next 2 st's, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,

to join, sl st into the top of the beginning hdc st.

TIP: If you want a messy bun hat, finish off your hat here or the next round.

Round 6: ch 1, *work 1 hdc into the next st, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,
to join, sl st into the top of the beginning hdc st.

Round 7: ch 1, *hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round, to join, sl st into the top of the beginning hdc st. Break off yarn leaving a long tail to sew the remaining hole of the crown closed and weave in ends.

 *COPY AND PASTE ME, THEN PRINT THE PATTERN*

To Begin:
Make the band/brim
Ch 9
Row 1. work 1 sc in 2nd ch from hook and in each ch across, ch 1 and turn (8sc)
Row 2. work 1 sc into the back loop of each sc, ch 1 and turn (8sc)
continue working row 2 until you have approx 46 rows.

Join band into a circle.

Leave yarn attached, ch 1 and sl st to join using the back loops of the last row made and the unworked loops of the beginning chain row.

TIP: Do not join too tight as it may pucker.

Round 1: Ch 1, work 1 hdc in each row end to end, sl st to join round.

Make your increases or decreases evenly in round 2

Round 2: Ch 1, work 1 hdc in the back loop of each hdc or the round, sl st to join round. (your count should be in multiples of 6)

Pattern Set Up Round:

Round 3: Ch 3, work 2 dc, ch 3 and 3 dc in same st of the ch 3, skip 2 st's, work 1 sc in next st, *skip 2 st's, work the shell st in next st, skip 2 st's, work 1 sc in next st, skip 2 st's* repeat from *to* to end of round. Join all pattern rows like this, loosely sl st into the next 3 st's and into the ch 3 space.
Pattern Round:

Round 4: Ch 3, work 2 dc, ch 3 and 3 dc in same st of the ch 3, *work (Special Stitch, Cluster) the bpdc cluster with the next 6 dc's, work the shell st in the ch 3 space* repeat from *to* to end of round, join round.

Rounds 5 and on, repeat Round 4 until the height of your hat almost reaches your crown. Do not sl st to the ch 3 space, make the sl st into the top of the ch 3.

The next rounds made, will give the hat a straight edge again.

Making the crown:

Round 1: ch 1, work a hdc in the top of the ch 3, work 1 hdc in the next dc, hdc the next dc and the ch 3 space of the shell together, work 1 hdc in each of the next 2 dc, hdc the next dc and the top of the cluster together, (you will have made 6 hdc's) *work 1 hdc into each of the next 2 dc, hdc the next dc and the ch 3 space of the shell together, work 1 hdc in each of the next 2 dc, hdc the next dc and the top of the cluster together* repeat from *to* to join, sl st into the top of the beginning hdc st. (your stitch count will be in multiples of 6)

Round 2: ch 1, (work all st's in to the back loop of the hdc's) work 1 hdc in the back loop of each hdc of the round, to join, sl st into the top of the beginning hdc st.

Begin decreases: For a baby, toddler hat complete the crown with the hdc st, for adult sizes complete the crown with the dc st.

For the purpose of this pattern, I will write the hdc st, please adjust this to a dc for the adult size hats and work a ch 2 at the beginning of the round, but do not count that ch 2 as a stitch.

Round 3: ch 1, *work 1 hdc in the next 4 st's, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,

to join, sl st into the top of the beginning hdc st.

Round 4: ch 1, *work 1 hdc in the next 3 st's, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,
to join, sl st into the top of the beginning hdc st.

Round 5: ch 1, *work 1 hdc in the next 2 st's, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,

to join, sl st into the top of the beginning hdc st.

TIP: If you want a messy bun hat, finish off your hat here or the next round.

Round 6: ch 1, *work 1 hdc into the next st, hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round,
to join, sl st into the top of the beginning hdc st.

Round 7: ch 1, *hdc the next 2 st's tog* (decrease made) repeat from *to* to end of round, to join, sl st into the top of the beginning hdc st. Break off yarn leaving a long tail to sew the remaining hole of the crown closed and weave in ends.