A decorative 20 row baby beanie
Matching sweater/cardigan now available, free crochet pattern
Matching booties now available, free crochet pattern
Matching booties now available, free crochet pattern
Introduction: With clever placements of the V stitch and 9 dc’s all in a row, a few sc’s and ch’s thrown in together, gives this pretty little stitch pattern a big tick. You will need a bit of concentration to begin with, but the pattern does repeat it’s self, so it will become repetitive.
To fit: Newborn to 3 Months
Measurements approx: Head Circumference
13 to 14 inches, hat height 5.5 to 6 inches
Please note, by using a smaller or larger hook, you
can make a smaller or larger beanie
Hook size: 3.5mm for
newborn 4.5mm for 3 months+ US G/6
Yarn: 8 ply approx 50 gm’s US DK/Medium.
I used, double knit Special, by Stylecraft
US crochet terms used
Skill level: beginner +
Tension: medium
Time: approx 2 hours
Stitches
used:
Sl st=slip stitch
Ch=chain
Sc = single crochet
Hdc= half double crochet
Dc =double crochet
Fpdc=front post double crochet
V st= (dc, ch 1, dc)
V stitch: The V stitch is (1 dc, ch 1, 1 dc), worked into the st indicated by the
pattern
Please
note! The beginning ch 1 and ch 2 of every rnd is not
counted as a st.
BEGIN:
Chain 4, sl st to first ch to form a ring. Or use a
magic ring.
Row 1, ch 1, work 12 hdc into ring, sl st to join in the 1st hdc (you will join this way on every round)
(Increase in every st)
Row 2, ch 1,
work 2 hdc into each hdc to end, sl st to join (24 hdc)
(Increase
in every 3rd st)
Row 3, ch 1, *work 1 hdc into the next 2 hdc, work 2 hdc into the next* repeat from *to* to end, sl st to join (32 hdc)
Row 3, ch 1, *work 1 hdc into the next 2 hdc, work 2 hdc into the next* repeat from *to* to end, sl st to join (32 hdc)
(Increase in every 4th st)
Row 4, ch 1, *work 1 hdc into the next 3 hdc, work 2
hdc into the next* repeat from *to* to end, sl st to join (40 hdc)
(Increase in every 5th st)
Row 5, ch 1, *work 1 hdc into the next 4 hdc, work 2
hdc into the next* repeat from *to* to end, sl st to join (48 hdc)
(Increase in every 6th st)
Row 6, ch 1, *work 1 hdc into the next
5 hdc, work 2 hdc into the next* repeat from *to* to end, sl st to join (56
hdc)
Row 7, ch 2, work 1 dc into same space
as join, work 1 dc
in each st to end, sl st to join (56 dc)
Begin
Pattern Rows
Row 1, Ch 1, work 1 sc in same space as join, skip 3 st’s, work 9 dc’s in
next st, skip 3 st’s,
*work 1 sc in next
st, skip 3 st’s, work 9 dc in next st, skip 3 st’s,*
repeat from *to* to
end, sl st to join in beginning sc, (7 sc, 7 groups of 9 dc)
Row 2, Ch 4, work 1 dc in same space as ch 4, ch 1, work 1 sc in the 4th,
5th and 6th dc of the 9 dc group, ch 1,
*work a V st (V st =1dc, ch1, 1dc) in the
sc, ch 1, work 1 sc in the 4th, 5th and 6th dc
of the 9 dc group, ch 1,*
repeat from *to* to end, sl st into the space
between the beginning ch 4 and 1 dc (7 groups of 3 sc, 7 V’s)
Row 3, Ch 3, work 4 dc in same space as join, skip 1 sc, work 1 sc in next
sc,
*work 9 dc in the V st space, skip 1
sc, work 1 sc in next sc,*
repeat from *to* to end, work 4 dc in same space
as the beginning (ch 3 and 4 dc) sl st into the top of the ch 3
Row 4, Ch 1, work 1 sc in same space as ch 1, work 1 sc in next dc, ch 1,
work a V st in the next sc, ch 1,
*work 1
sc in the 4th, 5th and 6th dc of the 9 dc
group, ch 1, work a V st in the next sc, ch 1*,
repeat from *to* to end,
skip 3 dc, work 1 sc in 4th
dc, sl st into the 1st sc of this round, (21 sc, 7 V st’s)
Row 5, Ch 1, work 1 sc in same space as join, work 9 dc in the V st space,
*skip 1 sc, work 1 sc in next sc, work 9
dc in the V st space,*
repeat from *to* to end, sl st into the first sc of
this round (7 sc, 7 groups of 9 dc)
Row 6, Repeat row 2, for a shorter hat finish here and go onto the
hat edge rows. Measures approx 4.5 inches end of row 6.
Row 7, Repeat row 3
Row 8, Repeat row 4
Row 9, Repeat row 5
Row 10, Repeat row 2
For new born and using a 3.5mm hook and 8 ply yarn,
your hat slightly stretched will be approx 5 inches in length.
Begin Hat
Edge
You have 2 options here.
Stop
the pattern repeats to make the simple ribbed edging below.
Or
continue the pattern repeats and end with a 9dc group from the pattern, for a
pretty scalloped edging, (Using pattern rows, 3, 4, 5)
Ribbed Hat Edge Instructions
Row 11, Ch 3, work 1 dc in same space as ch 3, work 1 dc in
next dc, work 1 dc in next ch 1 space, work 1 dc in each of next 3 sc, *work 1
dc in next ch 1 space, work 1 dc in next dc, work 1 dc in next ch 1 space, work
1 dc in next dc, work 1 dc in next ch 1 space, work 1 dc in each of next 3 sc,*
repeat from *to* to end, sl st into top of the ch 3 space (1 ch 3, 54 dc)
Row 12, Ch 3, *work 1 dc in next dc, work 1 fpdc around the
next dc,* repeat from *to* to end (1 ch 3, 54 dc)
Row 13, Repeat row 12 and finish off, or continue for length
desired.
My hat is now approx 6 inches in length
Free CrochetPattern Courtesy Of Cathy Wood
Aka,
Cats-Rockin-Crochet.
2014.
Chickie Magoo made this and supplied her instructions for making one to fit a 12 to 18 month old size.
I used Moda Vera "Sorbet" which recommends a 5mm or 5.5mm hook. I have average tension so I used a 5mm hook. I added 3 curlicues and a hand painted wooden button instead of a traditional flower.
The mannequin is a 20" head circumference and this will fit a 12 to 18 month old I think. It's 7-3/4" high and 17" wide
I did one more increase round than the pattern stated, other than that, I followed the pattern till the last 2 rows which I finished off with a row of SC then a simple picot row of *SC/ch3/SC into base of ch3, sc next 2* I'm glad you like my results!
Adult Version available, free crochet pattern
You can sell your items made from this free crochet pattern
I’d love to see this pattern used for charity use
Please link back to this pattern if you use it